Enzfelder

Enzfelder GmbH have a modern manufacturing facility near Vienna in Austria and manufacture diverse power transmission equipment to a wide torque range. Their extensive range of screw jacks is supported by a comprehensive range of complementary accessories and drive components, allowing a one stop source for full systems requirements. Enzfelder are happy to design and manufacture customised units where the standard product range does not meet customers’ particular requirements. In-house research, development, design and production backed by total quality management ensure that all products and accessories meet the highest possible standards.

Screw Jacks are ideal devices to push, pull, lift, lower and position loads. These are designed for both tensile and compressive loads and will operate in any orientation or mounting position. Enzfelder have 14 sizes of standard screw jacks from 250kN to 3000kN and lifting speeds up to 2.5m/min. There are a further 12 sizes for lifting speed up to 5m/min. For higher speeds up to 12m/min, screw jacks with ball screws or ball screw spindles are recommended.

The outstanding characteristics of Enzfelder screw jacks are as follows:

• Wide range of load capabilities
• High and low speeds available, according to the screw type and gearing
• Standard mounting arrangements and end fittings
• Ease of synchronization of several screw jacks
• Reliable self locking action when in a stationary position
• Special features include minimized backlash option, safety nut, bellows, protection tubes etc.

Enzfelder lifting systems built from spindle gear kits comply with safety regulations VBG8. Theatre lifting systems require higher safety regulations UVV14 and VBG14. For meeting these safety standards, safety nuts are monitored optically, electrically or thermally. ENZFLEDER offer many types of configurations in screw jacks from metric to imperial versions, ball screw jacks, acme screw jacks, electric screw jacks, bevel screw jacks, upright, inverted, high duty cycle, and plain or bellow protected ball screw nuts and special coatings for specific environments.

Imtec currently supplies Enzfelder Screw Jacks and Lifting Systems

Please contact us for more information.